Tile adhesive Cermipro grey 25 kg

25 kg grey tile adhesive (Cermipro)

The grey Cermipro adhesive is a high-performance adhesive for your floors. It's a high-performance and discreet solution for your tiling projects, thanks to its exceptional adhesion and impeccable finish, making it an ideal choice.

Choosing the grey Cermipro glue ensures:
- perfect camouflage thanks to its color which conceals any installation defects and offers an aesthetic finish, even on thin joints
- versatility for laying tiles indoors or outdoors on new or old surfaces
- Powerful adhesion with a reinforced formula that ensures a fast and lasting bond, even on difficult surfaces
- optimal and rapid drying, saving you time and allowing you to resume using your room more quickly
- ease of use, because, ready to use, Cermipro is applied easily and economically, without the need for mixing.

By choosing the grey Cermipro adhesive, you are opting for a superior quality product that guarantees a successful and durable installation.

Technical description

• - Color: gray
• - Operating temperature: 5-35 °C
• - Usage time: 2 hours
• - Operating thickness: 2-10 mm
• - Waiting time before grouting: 24 hours
• - Waiting period before pedestrian access: 48 hours
• - Packaging: 25 kg bag
• - Shelf life: 24 months
• - Storage conditions: in the original packaging, closed and protected from moisture
• - Applications: indoor flooring, outdoor flooring, interior walls, swimming pools
• - Substrates: concrete, cement-based plaster, single-coat plaster (CS IV), plasterboard, existing ceramic tile
• - Perfectly suited for: installing all ceramic and similar coverings. New and renovated substrates

CONDITIONS OF APPLICATION
- Application temperature: +5 to +35°C
- Resting time before spreading: 5 min
- Practical usage time (PUT): 2 hours
- Practical open time: 30 min
- Adjustment time: 20 to 30 minutes
- Waiting time before grouting: 24 hours
- Time required to make the soil available for use: 48 hours
Values obtained in the laboratory at 23°C and 50% RH, according to the applicable standard. These times will be shorter at high temperatures and longer at low temperatures.

CLEANING AND MAINTENANCE
Clean tools with water after use and before the glue hardens.

REMARKS
Do not place on a frozen, thawing, or hot surface. Work in a draft-free area.
In very hot weather, it is advisable to dampen the surface beforehand and to work in the shade, out of direct sunlight.
Can compensate for unevenness up to 10 mm (the day before tiling).

APPEARANCE – COMPOSITION
Hydraulic binder, sands of studied particle size, resin, specific additives.

Product consumption in kg/m²
The values do not take into account the condition of the substrate or that of the back of the tiles, the imperfections of which are likely to increase the consumption of the adhesive.

REFERENCE DOCUMENTS
Compliant with EN 12004 standard. CSTB certified.
DTU 52-2, corresponding amendments, Specifications Manual
Current professional techniques and rules.

Good to know:
The grey Cermipro adhesive is more flexible and malleable. It is much easier for a tiler to work with.