Lithofin MN Fleckstop water repellent for stone and concrete

Fleckstop Lithofin MN, in addition to protecting your concrete, marble, or stone slabs and sanitary ware, will strongly prevent the penetration of water, grease, or oil. This ready-to-use, solvent-based product contains high-quality water and components that resist grease.

It is suitable for almost all types of natural stone, whether polished, honed, or rough. It is also suitable for artificial stone and composites.

The Lithofin MN Fleckstop will adapt particularly well to walls, floors, but also to other sensitive surfaces such as stains on your tables, windowsills or worktops.

Effective both indoors and outdoors.

Your surface to be treated must be absorbent, clean, and completely dry for optimal results. Non-absorbent or damp surfaces cannot be impregnated. Glass, ceramics, and solvent-sensitive surfaces such as varnish, wood, and similar materials must be protected.

Your tools can be cleaned with thinner.

The procedure should be repeated every 6 months.

Technical description

• - Capacity: 250 ml
• - Weight: 0.30 kg
• - Supplier: Lithofin
• - Use: maintenance
• - Surface: indoor floor, outdoor floor, wall, table, worktops, sanitary facilities, kitchen...
• - Coverage: approximately 7 to 15 m²/liter, depending on the substrate's absorption rate. Consumption is halved during the second application.
• - Storage: closed, in a cool place
• Indicative values:
• - Polished stone surfaces: 12 to 15 m²/L
• - Very dense stones: up to 40 m²/L
• - Raw cut and sawn granite: 5 to 7 m²/L
• - Softened limestone: approximately 7 to 10 m²/L
• - Porous stoneware: approximately 3 to 6 m²/L

Good to know:
The temperature of the surfaces to be treated must be between 10 and 25 degrees. Lower or turn off the underfloor heating.

Protect your concrete and stone sanitary facilities now with Lithofin MN Fleckstop.