Do you no longer want to create a partition in your bathroom and prefer to design your walk-in shower entirely with a 200cm high glass assembly? The triple combi fixed shower screen set will meet your requirements.
Triple combination fixed shower screen set
The triple set of fixed shower walls allows you to create a fully glazed shower, letting in light to enlarge the volumes of your bathroom and streamline your shower space.
First, you must choose the two panels that will define your width, which can be between 80 cm and 100 cm wide. These panels will be fitted with aluminum profiles that will be fixed to the wall. The 200 cm height and 8 mm thickness ensure the product's strength and quality.
Next, you'll need to choose the shower enclosure panel, which will measure between 80 and 160 cm. It's essential to leave a minimum walkway of 45 to 65 cm to ensure comfort. A walkway of 45 cm is acceptable, but it will likely encourage you to enter the shower sideways.
A 30cm return is provided with your entire wall to prevent water splashes.
The unit is supplied with the necessary fixings and profiles; a brush on the floor will hold the walls in place in case of impact, and the unit will be held in place by a shower reinforcement bar attached to the wall.
This set allows you to isolate your walk-in shower , thus preventing water from splashing into the bathroom and ensuring a perfect seal.
The advantage is that you preserve your nooks and crannies to place bathroom cabinets or other storage units.
| Characteristic | Value |
|---|---|
| Glass | tempered, anti-limescale |
| Wall and return thickness | 8 mm |
| Height | 200 cm |
| Material | aluminum (profiles, reinforcement bar and ground fixing foot). |
| Available fixed panel dimensions | 80 cm, 90 cm, 100 cm, 120 cm, 140 cm, 160 cm |
Included with:
- 3 fixed panels, with wall profile and fixing feet
- 1 fixed 30 cm return and its corner profile
- 1 additional corner profile
- A double reinforcement bar, which can be cut to size
- Sealing gaskets
Good to know:
A professional building contractor is required to install this walk-in shower enclosure.
The glass fixing elements are made of different materials (aluminum, brass, and stainless steel). Therefore, the brushed color varies slightly from one element to another.
With a set of triple fixed shower walls, you meet the criteria for decoration, design and optimization of your bathroom.
- Shipping costs vary depending on your delivery address. You can find all the details in the "Delivery" section of our terms and conditions.
- You have 14 days to return one or more products, please consult our Terms and Conditions according to the type of product.
-
D. LOPEZ 5.00One of the feet was missing a thread. I needed it urgently, so I had to improvise a bit, but it's fine in the end. A little disappointed, but not too much.
-
B. DURAND 5.00Absolutely excellent. The item met my expectations. Delivery was fine.
Yes, the unit can be installed directly on a tiled floor in a walk-in shower, provided that the floor has a suitable drainage slope and is properly sealed.
It is necessary to check that the walls are plumb before installation. Any adjustment options depend on the wall profiles. A significant lack of plumb must be corrected before installation.
Yes, the double reinforcement bar provided can be cut to size to adapt its length to the configuration of the shower.
Yes, the Triple Combi set is reversible and can be installed with an inlet on the right or left, depending on the bathroom layout.
Yes, the set includes three fixed walls with their wall profiles and fixing feet, a fixed 30 cm return with its corner profile, an additional corner profile, a double reinforcing bar that can be cut to size and sealing gaskets.
Yes, the 30cm return is fixed and cannot pivot or fold down.
The dimensions given are nominal. For example, a 140 cm wall panel actually measures 138 cm to allow for installation and tile thickness. This difference does not mean that the profiles allow for 2 cm of adjustment.
#tots.fr
Have you captured a special moment with one of our products? We'd love to see it! Share your photo on Instagram and have it featured here.
All you have to do is use the hashtag #tots.fr and/or tag @tots.fr in your post.