Full-height shower enclosure

Full height 8mm shower screen

With interior spaces becoming increasingly spacious, bathrooms are also getting bigger, but sometimes with restrictive requirements. Standard sizes are becoming too limited or not stylish enough, which is why we are launching an exceptional custom-made product.

You can opt for this full-height fixed shower screen, allowing you to create a custom-made shower enclosure down to the centimeter. It also helps retain heat in your shower.

This wall which goes from bottom to top guarantees you a very contemporary and above all very effective design, because obviously unlike a classic wall, the full height wall will have the same resistance as a wall because it is supported on both sides.

Available in 3 weeks, we manufacture your full-height fixed shower screen to the millimeter. Simply fix one profile to the floor and the other to the ceiling, then slide your glass panel into place.

Attention
It is essential to deduct 1.5 cm from the total available height. This 1.5 cm accounts for the thickness of the profiles and the possible adjustments.

Technical description

• - Glass thickness: 8 mm
• - Material: glass
• - Minimum order height: 200 cm
• - Minimum order width: 20 cm
• - Maximum width: 150 cm
• - Not supplied: profile (3m length to be cut)

How to properly measure it?

1/ Height: Measure from floor to ceiling on both sides of your wall, and also in the middle. This will ensure the floor is level. If your bathroom floor is level, the height will be the same everywhere. In this case, simply subtract 1.5 cm from this measurement and enter the result to confirm your order. However, if you get different heights at the three points measured, it means your floor is not level. In this case, you must record the highest measurement and then email us a detailed sketch.

2/ Length: To calculate the length of your shower enclosure, simply position your measuring tape at the starting point of the wall and measure to the desired end point. If you have any issues with it being out of plumb, don't worry, the profile is designed to correct this problem.

3/ The profile: For this type of shower enclosure, a simple U-shaped profile cannot be used because it won't allow you to position your glass. Therefore, we offer a profile with a double interlocking joint. This allows your glass to be easily and smoothly inserted, leaving no gaps and guaranteeing a perfect seal. Simply unclip the profile, position your glass, and secure everything to create your full-height fixed shower screen. Do not use a wall profile; instead, install the 300 cm profile (which can be cut to size) on the ceiling and floor. A simple bead of silicone sealant between the screen and the wall is sufficient. If you require an additional 300 cm profile, please click here .

Good to know:
Given the customization of the wall in relation to the ordered dimensions, it is impossible for us to cancel an order.
Furthermore, we maintain that it is imperative to position a profile on the floor and ceiling, but if you wish you can also install a profile on the wall.

Treat yourself to the luxury of never being cold in your shower again with the full-height fixed screen that keeps all the heat inside your space.