The Wavia 120 cm wall-hung vanity unit impresses with its undulating lines in bentwood and its genuine walnut veneer. It combines a large drawer, a side storage compartment, and a matte white Solid Surface basin.
Asymmetrical cabinet Wavia 120 cm walnut veneer
The Wavia 120 cm bathroom vanity unit stands out with its wave-like design, achieved through a technical wood-bending process. Its generous curves replace traditional angles, creating a soft and contemporary silhouette. This complex construction gives it a unique identity, rarely seen in bathroom furniture.
Its water-resistant plywood structure is covered with a genuine walnut veneer, surface-treated to preserve the wood's natural grain and color variations. Unlike wood-effect finishes, this provides the authenticity and warmth of real walnut.
The Wavia optimizes storage space thanks to a large sliding drawer and a side door integrated into its rounded section. Both compartments feature soft-close mechanisms. The handles are cut out at a 45° angle, preserving the clean lines of the piece.
The matte white Solid Surface basin, with its fine lines, follows the undulating shape of the vanity unit. Its matching drain cover maintains the clean aesthetic of the whole. Supplied without a tap hole, it allows you to choose between a wall-mounted or deck-mounted mixer tap, after drilling with a diamond hole saw.
At 120 cm wide, the Wavia combines a comfortable wash surface, practical storage, and a wall-hung installation that frees up floor space. It comes fully assembled.
The advantages of the Wavia furniture
- Space saving: its compact and rounded shape optimizes space and facilitates movement, while still providing practical storage.
- A genuine walnut veneer: a water-resistant plywood covered with real walnut wood, surface-treated for a natural finish.
- Optimized storage: a large Unihopper sliding drawer and a side door that cleverly utilize the rounded shape of the furniture.
- Soft-close mechanism: drawer and door equipped with a soft-close system.
- A sleek and customizable washbasin: Solid Surface matte white with drain cover and the possibility of installing a wall-mounted or deck-mounted tap.
| Characteristic | Value |
|---|---|
| Brand | Tots |
| Model | Wavia |
| Furniture material | plywood with walnut veneer |
| Color | walnut |
| Total dimensions (L × D × H) | 120 × 50 × 45 cm |
| Storage | 1 large sliding drawer and 1 side door |
| Drawer runners | Unihopper with soft-close mechanism |
| Hand grip | integrated, without a visible handle |
| Door opening direction | non-reversible |
| Installation | suspended |
| Assembly | Delivered assembled |
| Washbasin | Matte white solid surface |
| Tap hole | not pre-drilled, can be drilled with a diamond hole saw |
Included with:
- Furniture Wavia 120 cm
- Washbasin in matte white Solid Surface
- Matching drain cover
- Fasteners
Not included:
- Faucet
- Siphon
- Crowded
- Mirror
Good to know:
The washbasin is supplied without a tap hole, allowing for installation with a wall-mounted or deck-mounted mixer tap. To install a tap on the washbasin, a hole can be drilled using a diamond hole saw suitable for solid surface materials.
- Shipping costs vary depending on your delivery address. You can find all the details in the "Delivery" section of our terms and conditions.
- You have 14 days to return one or more products, please consult our Terms and Conditions according to the type of product.
Yes, a sanitary silicone sealant must be applied between the sink and the wall to ensure a watertight seal and prevent water from seeping behind the unit.
The standard drilling diameter is 35 mm. Use a diamond hole saw suitable for Solid Surface.
The water outlet of a wall-mounted tap should generally be positioned between 10 and 15 cm above the bottom of the basin. The exact height depends on the shape of the basin and the length of the spout, in order to prevent splashing.
Yes, if the furniture is installed on a placo partition, appropriate reinforcements must be provided behind the partition. On a load-bearing concrete or solid brick wall, fixings suitable for the substrate are sufficient, provided it is strong enough.
#tots.fr
Have you captured a special moment with one of our products? We'd love to see it! Share your photo on Instagram and have it featured here.
All you have to do is use the hashtag #tots.fr and/or tag @tots.fr in your post.
